Sun-Mar Centrex-3000NE SELF-CONTAINED COMPOST Toilets
1 PINT FLUSH TOILET
$350.00 USD * ea.
Sun-Mar offers a selection of 1 pint flush toilets for use with regular Centrex 1000, 2000, and 3000 series central composting toilet systems. More than one "1 pint flush" toilet can be installed with these units if necessary. The constraint is the number of people using the system rather than the number of toilets.
Using about one pint per flush, these ultra low flush toilets provide all the advantages of a flush toilet while minimizing water usage. They are ideal for use with Sun-Mar Central Composting Systems, but can also be used with holding tanks, overloaded septic systems, and in RV's.
A simple foot pedal flush opens the water valve and gate when pushed down, and fills the bowl with water when lifted. After flushing, a small amount of water is held in the toilet bowl which is sealed by a self-cleaning ball valve and teflon seal. Even gravity-fed water from a roof tank is sufficient to flush a 1 pint flush toilet. In winter they can be flushed manually using a container if necessary.
The 1 pint flush toilet has a regular sized toilet seat. In some instances extra height is needed to allow the toilet to gravity feed to the composting unit. Where this is the case, the 1 pint flush toilet is availabe in a low profile model with a 10" seat height, can be mounted on a platform.
For Sun-Mar installations, we recommend the 510 Plus as the unit of choice as it has the size and appearance of a "regular" toilet. 1 pint flush toilets are available in either White or Bone. They come complete except for the required 3" four (4) bolt floor flange.
Weights (Lbs.) & Dimensions (SEALAND 510+)
Unit Weight 45 lbs (20.41kg)
Height to the top of seat 17 1/8" (435mm)
Total Height 18 3/4" (476mm)
Unit Depth 20 1/2" (521mm)
Unit Width 15 1/4" (387mm)
Distance from back - centre of waste inlet 10 1/4" (260mm)
Weights (Lbs.) & Dimensions (SEALAND 511+)
Unit Weight 43 lbs (19.5kg)
Height to the top of seat 13" (330mm)
Total Height 14 5/8" (372mm)
Unit Depth 20 1/2" (521mm)
Unit Width 17 1/4" (438mm)
Distance from back - centre of waste inlet 10 1/4" (260mm)
CENTREX
3000 NE
$1995.00 USD *
The Centrex 3000 NE utilizes a continuous flow design for very heavy cottage or medium residential use. With a continuous flow system, rotation of the drum moves compost along the larger and longer 3000 series drum, before it drops automatically into the collection housing at the end of the unit. Under normal operating conditions the drum will not have to be turned backwards for emptying.
The Centrex 3000 NE (Non-Electric) is the non-electric version of the Centrex 3000 which is fitted with a 4" vent stack. Installation of a 12 Volt fan is optional, but it is recommended for heavy seasonal, residential use, or where the installation is particularly subject to downdraft, being surrounded by high trees or hills. We also recommend the fan if you need to install a bend in your vent stack.
All Centrex 3000 series units are supplied with a 1" drain hose which should be connected to the 1" drain at the bottom left of the unit. Click here for more information on handling excess liquid. This unit is for use with a Sealand low flush toilet, purchased separately. More than one toilet may be installed on this system, as shown in the picture.
Capacity
Listed capacities refer to the amount of people, on average, using the unit per day. Do not pick a unit that is below your capacity.
Residential/Continuous (Adults/Families) 5 adults or families of 7
Seasonal/Vacation (Adults/Families) 8 adults or families of 10
Electricals
Electricals must be connected while the unit is in AC use for proper operation
Maximum Amps (With Heater On) N/A
Fan Watts (Required or Optional Hookup) 2.4 Optional
Heater Watts (When Thermostat switches it on) N/A
Average Power Use in Watts (Heater on 1/2 time) N/A
Vent & Drains
Vent Pipe 4" PVC Thinwall
1" Drains (Required or Optional Hookup) Required
Weights (Lbs.) & Dimensions
Unit Height - Depth - Width (including collection housing 13 1/2") 29 1/4" x 27 1/2" x 71" by 27"
Product Weight/Shipping Weight 102-172
Shipping Carton Dimensions (W by L by H) 28" by 60 1/2" by 33"
Depth Required to Remove Drawer 45 1/2"
Height to Top of Waste Inlet Assembly 31 1/2"
Vent Inlet Center Distance From Rear - Left Side 19 1/4" - 37 1/4"
Waste Inlet Diameter (including flange) 3" DMV
Vent Inlet Center Distance From Rear - Left Side 33" (top)
the mgmt